MKGW4 Outdoor Cellular Gateway

The MKGW4 is an advanced Bluetooth Outdoor Cellular Gateway with GPS and LBS fusion positioning. It offers global connectivity through CAT.1/NB-IOT/CAT.M/GSM network. Acting as a data bridge between BLE beacons and the cloud, it collects broadcast data from nearby beacons and uploads it via the Cellular network.

Meanwhile, the integrated GPS technology locates MKGW4 and reports its location to the cloud, making transportation routes visible and controllable. Complemented by a motion sensor, MKGW4 provides an efficient solution for cold chain monitoring, logistics transportation management, school bus locating, and safety systems.

 

Product Features

> Supports multiple cellular networks including NB-IOT, 4G CAT.1, CAT.M and GSM for global connectivity

> Integrated GPS and LBS (cell tower) positioning technology

> Multiple BLE scanning and reporting modes to adapt to different usage scenarios

> Supports multiple positioning modes like periodic, motion-based, on-demand, etc.

> Can switch between gateway mode and tracker mode

> Filters and selectively reports BLE data to reduce data usage

> Remote management of beacons and OTA firmware upgrades

> Offline data storage when cellular connectivity is unavailable

> Abnormal alarm notifications for low battery or power disconnect

> Can detect vehicle ignition status via digital input

> IP67 waterproof and IK09 shake-proof

Highlights

MKGW4-extensive-global-cellular-coverage

Extensive global Cellular network coverage

The MKGW4 outdoor Cellular gateway offers global connectivity for uninterrupted monitoring through cellular networks such as CAT.1. It supports LTE frequency bands covering worldwide regions, enabling maximum coverage across locations.

Integrated GPS&LBS dual-mode positioning

The built-in GPS and LBS fusion positioning enables flexible outdoor asset tracking. Switch between periodic, motion-based, on-demand, and disabled positioning modes to suit your needs. LBS kicks in when GPS is unavailable as a reliable fallback.

Integrated GPS&LBS dual-mode positioning
MKGW4-flexible-bluetooth-scanning-modes

Flexible Bluetooth scanning modes

The outdoor Cellular gateway provides both real-time and periodic Bluetooth scanning and reporting to meet diverse data collection needs. Customize scan intervals and select data fields to report. You can also toggle between gateway and tracker-only modes.

Rugged gateway built for outdoor use

With an IP67 rating and offline storage, the outdoor Bluetooth Cellular gateway withstands dust, rain and water exposure. Multiple mounting options like magnets, tape and screws make permanent or temporary installation easy. It operates from a wide 4.8-60V DC voltage range.

MKGW4-rugged-for-outdoor-use

General Specs

Mechanics

Material – ABS+PC

Colour – Grey

Dimension (L*W*H) – 122.4*72.9*33.8 (external wires not included)

IP rating – IP67

Bluetooth

Chip – nRF52840

Bluetooth Protocol – BLE 5.0 (support 1M/2M/Coded LE PHY)

Bluetooth Mode – Scanning and advertising

Antenna – External/internal antenna is optional

Environment

Operating temperature – -20 ºC~ 60 ºC

Storage temperature – -30 ºC~ 70 ºC

Humidity – Maximum 95% non-condensing RH

Cellular
Type – Optional Connectivity Versions:CAT.1/NB-IOT/CAT.M/GSM

Band – Global bands

Communication

Protocol – MQTT V3.1.1

Data security – Data security

Data Format – Hex

Configuration – APP Bluetooth configuration

FOTA – Bluetooth DFU and MQTT remote OTA

Hardware
Power supply  – Main: 4.8V-60V DC power supply; Backup: 3200mAH Li-on rechargeable battery

LED – 4* intelligent RGB LED (to indicate Power, Switch, Cellular and  GPS status)

Switch – 1* hall sensor, use Magnetic to turn on/off device

Button – 1* Reset button inside the device

External Memory – 32MB (256Mb), to save offline data

Sensor – 3-Axis Accelerometer

SIM card – Nano SIM/ E-SIM

External wires – 1* positive power wire; 1* negative power wire; 1* digital input wire

GNSS

Galaxy – GPS, Beidou

Accuracy – 2.5M-10M (GPS fixed)

TTFF – Clod start: <=32 s;Warm start: <= 10 s;Hot start:<= 1s

Antenna – Internal

Backup – Cell tower location (LBS) fallback for positioning when NSS can’t get a fix

Discover Our Key Features

Amparo Technologies offers a suite of innovative features designed to enhance connectivity and efficiency in smart living environments.

Real-Time Data Analytics

Leverage powerful analytics to make informed decisions and improve operational efficiency.

Scalable Solutions

Our flexible platforms grow with your needs, ensuring long-term value and adaptability.

User-Friendly Interface

Experience intuitive design that simplifies complex operations, making technology accessible to everyone.

Request a demo.

Let’s be real—anyone can make bold claims online. That’s why, before you commit, we encourage you to book a demo with us. We’ll show you exactly how our custom-built platform & solutions fit your specific needs and how it can help drive greater profitability for your business.